The residence needs to be treated because it is considered to express the soul of the owner. From the interior of the residence and parts of the living quarters such as courtyards, living rooms, floors and walls, even bathrooms, from which the brightness of the inhabitants is reflected, whether they are diligent and regularly guarding their residence.
Here are 9 steps to take care of your dwelling place like clean crust in bathroom, repair cracked / broken tile floor, repair wet or damp floor, repair leaking bathroom floor, paint wall Need to do repainting, step nail wall so as not to crack, protect the door frames and windows to be free from termites, and eradicate the fungus at home.
So if you want to be judged to have an exciting expression of the soul, quickly take care of your stay with guidance and trick below:
1: Clean the crust in the bathroom
The brownish-brown bathroom floor can be removed in the following way: The crust is rubbed repeatedly with pumice and soapy water, then washed with clean water. Citroenzuur (citric acid) is sprinkled on the inner or outer walls as well as the wetted bath basin first, let the citric acid react for an hour. Then, brushed and watered with clean water and washed until completely clean. After that dry with a dry cloth. Citric acid or often referred to citron in the form of white powder that can be obtained at some bakery equipment.
2: Conducting repair of cracked / detached ceramic floor
The cracked ceramic floor is carefully removed so that the intact ceramic does not escape. Nat scraped up with a sharp object. Then the floor pair is released or broken down to the basic, made basic floor, then replacement floor tiles are installed.
When the ceramic floor tiles are damaged, grout is cleaned first by way of scraping. Then grout watered with clean water. After that the grout contains a combination of a little liquid and let it sink into the inside. At the moment the contents are still 1/2 dry, coupled with a combination of more thick and pressed to solid. Previously the stuff was drying, the remnants of fillers scattered on the floor surface wiped with a dry cloth.
3: Performing a wet or damp floor repair.
Improvements on wet or damp floors are actually quite easy to come from knowing the trigger. If water absorption into the floor surface enters through the grout, the grout is covered with a waterproof material. When it goes on a floor that is not water-resistant, all wet and damp floors are dismantled to the sandy basement. Above urugan sand is coated with a plastic sheet and then topped with a combination of waterproof specimens with a ratio of 1 cement: 2 sand as thick as 3 cm. Floor ready for re-installation.
4: Doing a leaky bathroom floor repair.
Leakage in the bathroom at home generally comes from ceramic grout. Often grout is eroded by water, cleaning chemicals, soap, or ceramic tile steps in bathrooms that are less fitting. Must be in the first know whether the ceramic is well attached to the floor through the way the floor stepped with a little insistence or diketuk. When it sounds loud it means there is a gap or empty cavity.
5: Paint the wall so it will not peel easily.
So that the paint on the wall is not easy to peel so the use of plamur must be limited only to the cover of the cracks of fine hair on the wall. Often we do the mistake of using plamur so basic paint arrangement. Plamur material is not made to bind paint until if it is still used in the painting system, so the paint will also easily peel off. When painting on the wall should be taken with care.
When the painting is done in a rain condition, the paint will also need a long time to dry. Similarly, if the painting is done on the sun is so hot, eventually also less good. The outer painting (wall surface) will also dry earlier than on the inside. This kind of thing has the potential to result in cracking, rubbing or peeling paint. Good time to do the painting is dry and not when the sun is so bright.
6: When do you need to do repainting?
Repainting needs to be done when we find the residential wall has been chalked. Signal sign can we recognize by rakap palms on the surface of the wall. If we get the remaining white powder meaning the walls need to be painted again.
7: Step nail wall so as not to crack.
Often we nail the wall to hang a frame or a household accessory, but we meet dingding so cracked. This kind of thing happens is not because of the combination of less good species but because we have not know the steps to nail the right wall. The move is to provide cross-cut tape on the wall before the wall surface nailed, and then nailed in the middle of the cross tape just now. When finished, the tape is released slowly as needed.
When the wall material is less qualified, so if nailed, the wall will also fall out. Steps to overcome that spray two to three tablespoons of vinegar on the wall that will be nailed. Wait until the new dry then the wall can be nailed.
8: Protects the door and window frames so they are free of termites
Step by mixing 3 Oil and 1 diesel and stirred until blended. The combination was smeared all over the wood surface until the combination of oil and diesel was completely dry. Then painted on the wood surface. Can be previously painted, wood surface coated with anti-fungal drugs to avoid attacks from termites.
9: Eradicate the fungus at home.
To handle light mushrooms and recently attacked a few sides of the residence on the walls and ceiling or even the equipment of residence, can be used vinegar, fungicide (mushroom remover) or disinfectant disinfectant. Steps, duster drops vinegar, washed in parts of the fungus attacked slowly so that the fungus spores do not fly anywhere. Sweeping is repeated with new vinegar and cloth. Brush is not recommended to clean the mushrooms because it will also make the spores spread to different places, for example attached to the equipment, sofa or inhaled by humans.
If the fungus attack has been old and heavy enough, for example on the ceiling for leaking, as soon as the leak is repaired and exchanged ceilings or repainted. Installation of sanitation also needs to be kept from damage and leaking so as not to cause the occurrence of fungus.